beBee background
Home
>
Professionals
>
Engineering / Architecture
>
Calgary
parth vyas

Social


About parth vyas:

More than 20 years of extensive experience in field of Civil/Structural Engineering including various phases of the project like Feed, DBM, Detail engineering and site execution phase. My experience covers various industries like Fertilizer plants, oil & gas (including SAGD and Mining oil-sand), hydrocarbon process industries(Including PP/HDPE and Olefin recovery plant), refineries, CO2 emission and Sulphur recovery, material handling plants and Power plant industries (This include Combined cycle and open cycle power plants). My experience includes detail civil/structural design including estimation, BOQ, structural steel connection design by various international codes like BS/AISC/Canadian and south African codes. 

My professional expertise includes detail civil structural design for Process structures(including Pellet Storage Silo Structure, Extrusion Building, Loop reactor building), Piperacks, cable and pipe trenches, underground RCC tanks/dykes, Storage tanks foundations, machine (pump/compressor) foundation, various process equipment(including exchangers) foundation and blast resistance single story control room buildings.

I worked in various countries like India, Italy, France, Canada, South Africa, Saudi Arabia and Oman. I have worked in various international code like IS, ACI/AISC, Canadian, South African, British, Russian and EC.

Experience

 

 

Oman Oil Company (OQ)

 

Project Management Team (Through Worley Parson Oman)

 

 

 

Lead Civil/Structural 

Engineer

 

(2017 August till Date)

 

 

Oman Oil Company (OQ) 1000MTPD Ammonia plant 

  • Responsible for quality, scope and schedule review for civil/structural activity for 1000MTPD Ammonia plant.
  • Responsible for coordinating with EPC contractor’s civil/structural/arch/geotech department for project’s scope/schedule review and execution.
  • Responsible for quality and scope requirement check/review and monitoring of EPC Contractor’s civil/structural/arch/geotech department documents 
  • Participated in 3D Model review, HAZOP, SIL, risk assessment and also participated in preparation of risk response plan for the project in engineering/construction and execution phase.
  • Participate in joint lesson learnt workshop with EPC contractor and Vendor
  • Conduct cold eye and detail reviews of EPC Contractor’s complex designs/specifications to ensure that technical integrity and quality of the deliverable is achieved with project objective/scope including design codes, standards, specifications and best engineering practices.
  • Review and quality check for Vendor document 
  • Review contractor / supplier query / concession / deviation requests, and provide technical recommendations and approval
  • Assist with evaluation and assessment of EPC Contractor’s change requests and claims
  • Attend visits to construction material vendors / suppliers for reviews and tests / inspections
  • Working closely with construction team members to anticipate problems in the field.
  • Provide responses to site queries and develop any engineering solutions necessary to support those responses
  • Participate in scope/schedule management meetings and weekly update meetings.
  • Participated in resolving any scope/schedule conflict related issue with EPC contractor and Vendor.
  • Site coordination with EPC contractor/Vendor and sub-contractor for quality assurance during construction activities and coordination with EPC contractor (site and design office) for construction/engineering related Site issues.
  • Part of weekly construction schedule/quality monitoring meeting and resolving issues with EPC contractor on site.
  • Prepare and weekly presentation of Civil/Structural related construction activities/issues in fronts of Management.

 

Wood Group Mustang

Saudi Arabia

 

 

 

 

Lead Civil/Structural 

Engineer

 

(2017 Jan- March)

 

 

 

 

 

Saudi Aramco JEC RO DESALINATION AND SEWAGE TREATMENT PLANT

  • Sr CSA Lead to control quality of the output documents.
  • Man-hour planning for job and deliverables
  • Critical technical checks for all structural calculation deliverables including drawings and calculations. 

Shaw Rolta imited

(Stone & Webstar,

Shaw E & C FRE) 

Lead Civil/Structural 

Engineer

June 2009 to Jan 2010

 

Olefins Recovery Project at Singapore based on British and Singapore code (Ethylene Plant, clint:- Exxon Mobil)

  • Performed duties on checking RCC/structural drawings and design for different process structures, misc. pipe support structures and corresponding (including equipment supported foundation) foundations using foundation 3D and Mat 3D.

Jacobs Canada Inc., 

Calgary 

Sr. Civil/Structural 

Engineer

(May 2007 to Feb 2009)

 

 

 

(Feb 2010 Mar 2016)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sasol South Africa 

Assignment for 6 Months

(June 2015 to Nov 2015)

Oil Sand SAGD/Mining Central Plants, Wellpads and Sulphur Recovery Plants (Clint:- Suncor Energy, Osum Taiga, Nexen Oil Sand, CNRL, SASOL) OSUM TAIGA Oil/Sand SAGD(Cold Lake/CPF Capacity 25000BBL/Day)

  • Appreciated for my role as civil/structural coordinator/area lead and responsibility for making EWP, CR/MR (Engineering work packages, Construction requisition and material requisition) and maintaining very effective inter-disciplinary interactions. Completed the project within tight schedule and estimated cost. Preparation of (DVP) deliverable verification list based on which preparation of man hours estimates and scope definition for the project. Scoping document study and development of scope definition with help of interdisciplinary discussion and taking part in (IAP) interactive planning session with different discipline. Helping Lead engineer for preparation of detail schedule from scoping documents and DVP. Monitoring the deliverables/documents progress and schedule for Mumbai workshare Team. 
  • Regular coordination with Mumbai workshare team for their technical/man hour related and deliverables quality check issues and guiding them.
  • Acquire, develop and manage effective work teams. Assign tasks among team members. Quality checking for the technical work performed by the team to insure uniformity, and lining with project’s/client’s specification, objectives and philosophies. 
  • Successfully executed the design of pile foundation, Piperacks modules and stick built, Equipment supported process Structures/Modules, wellhead modules, Incinerator stack foundation, Anchor block for acid gas flare stack, Genset and transformer foundations, MCC/Substation Building, Masonry fire wall, and working out oil containment area calculations and checking of engineering drawings for the above scope of work.
  •  Building Modules and Exchanger supported structures/Modules in steam generation, utility, water treatment and offset area.
  • Develop structural connection standardization & structural connection design for standard wellhead modules.
  • My modularization experience become enhanced by having assignment in South Africa module yard for 6 months in which my responsibility as a structural engineer was to check module structural integrity and give clearance of module punch for loading of  pipe, electrical, mechanical and Instrument/Mechanical equipment. This responsibility also includes supervision of module jacking and module weighing by cell load test and preparation of module weighing reports and module CG verification after getting module weight by cell load test. I was also having experience to check module rigging strategy and drawings prepared by module lifting contractor using 4, 6 and 10-point lift using spreader bar with the use of one or two crane heavy lift.
Tecnimont ICB Pvt. Ltd., Mumbai, India

Principal Engineer

 

(2006 to 2007)

Qatar chemical (Client Chevrons Corp.), Polyethylene and Naphtha cracker plant:

  • Extensively used various American codes like ACI, ASCE & AISC.
  • Responsible for civil/structural design of Process main plant and interconnecting pipe racks, Pellet Storage Silo Structure, Extrusion Building, Loop reactor building, TEAL Area storage tank foundation and retaining dyke wall with containment calculation. Catalyst Activation Building, Equipment supported foundation including dynamic analysis of pump and compressor foundations, Exchanger platform design.

Senior Engineer

 

(2004 to 2006)

 

Engineer

(2002 to 2004)

 

 

 

 

Deputation to Relience Refinery  Industry field Design cell

  1. PP/HDPE Pollock Poland PP Plant, capacity 400000 ton/year and HDPE Plant, capacity 250000ton/year. Extensively used various European code provisions.
  2. LNG Terminal Hazira Surat, India for Shell Petroleum company
  3. HDPE/LDPE Tasnee, Al-Jubail, Saudi Arabia
  4. PC1 & PC2 for Petro-Rabigh project (Client Saudi Armco)
  • Responsible for civil/structural design of piperacks, process structure like dryer & catalyst activation building, design of foundation for process equipment, heat exchangers and pumps, structural design of operating platforms.

5    Worked in field/site as structural design engineer and site supervisor for MTF (Marine Tank farm) RTF (Refinery Tank farm) area. Responsible for structural design and site supervision of power transmission line tower for refinery substation. 

  1. Responsible as Sr Civil\Structural Engineer for design and quality checking for Ammonia and Potash process plant.

 

On deputation to Milan, Italy

(2006 to 2007)

  • Performed specialized blast resistance design for switchgear building (substation building) for Tasnee project at Al-Jubail, Saudi Arabia with SG-22 Method.
  • Coordinated and Prepared Design Report based on specialized dynamic analysis and design for Recycle-Ethylene Compressor.
  • Prepared various project design basis based on Client ITB Documents.
  • Prepared basis for standards and specifications of Reinforced Concrete and Steel works.
Larson and Toubro Sargent and Lundy, Baroda, India

Engineer

(2001 to 2002)

200MW OCPP (Open cycle Power plant) at Salalah, Oman: (Client Dhofar Power Company) 

330MW CCPP (Combined cycle Power Plant) at Delhi for DVB (Delhi Vidhute Board)

  • Worked for Dhofar Power Company using British Code Provisions.
  • Preliminary Estimation and preparation of bill of materials for Main Power plant, Preparation of Specification documents.
  • Responsible for Structural design of cable trenches for main plant, auxiliary foundations, Emergency DG station, Transformer and fire wall foundations, central plant pipe racks, substation/switchgear buildings and power transmission line towers.
  • Performed 3D-Interface checking with help of Plades 2000.
Bhagwati Design Pvt Ltd., Baroda, India

Engineer

(1999 to 2001)

Saurashtra Cement Plant & M/s ACC Limited, Wadi, India:

  • Responsible for civil/structural design of various process and material handling structures like coal mill building, raw mill hopper building, stacker and reclaimed shed and trestle support for belt conveyer systems.

 

Education

Educational Qualifications:

  • 2011- 2014: Master of Engineering (Civil), University Of Calgary, Calgary, Alberta, Canada.   
  • 1997- 1999: Master of Engineering (Structural), BVM College of Engineering, Vallabh Vidya Nagar, Gujarat, India. Passed with Distinction.
  • 1993- 1997: Bachelor of Engineering (Civil), DDIT Engineering College, Gujarat, India. Passed with Distinction.

 

Memberships & Professional Associations:

  • Professional Member of APEGA (Alberta), Canada since 2010 September (P.Eng)
  • Professional Member of APEGBC (British Colombia), Canada since 2014 September (P.Struct)
  • Professional Member of PMI science 2016 March (PMP, Project Management Professionals)
  • Professional Member OF PMI Sept 2020 (PMI-ACP, Agile Certified Practitioner)
  • Registered Professional Engineer in Saudi Council of Engineers since 2017 January
  • Member of AISC since 2008
  • Received Certificate of Achievement from Jacobs Canada Inc. for Cost effective Engineering solution 

Professionals who compete with parth

Professionals in the same Engineering / Architecture sector as parth vyas

Professionals from different sectors near Calgary, Alberta

Other users who are called parth

Jobs near Calgary, Alberta

  • Capleo Global

    Dot Net Software Developer

    Found in: Talent CA C2 - 4 days ago


    Capleo Global Calgary, Canada Contract

    Position Dot Net Software Developer · Location Toronto, ON · Duration 6 Months Contract (High possibility of extension) · Must haves · 10+ years of experience with extensive knowledge of programming a ...

  • Canadian Pacific

    Manager - Data Management

    Found in: Jooble CA S2 - 4 days ago


    Canadian Pacific Calgary, AB, Canada

    Canadian Pacific (CP) and Kansas City Southern (KCS) are now CPKC. As the only truly North American railway, we are making big moves Drawing on our strong foundations and heritage, CPKC moves essentia ...

  • XTL Transport, Logistics, Distribution

    Trailer Technician

    Found in: Jooble CA S2 - 14 hours ago


    XTL Transport, Logistics, Distribution Airdrie, AB, Canada Full time

    XTL Transport has been a trusted employer for technicians and drivers for over 38 years. We're searching for an experienced technician in our Aidrie location who can diagnose and repair simple and com ...