- Performing pressure vessel design and calculations per applicable ASME Pressure Vessel Code and customer specifications using Compress.
- Performs engineering mechanical design of vessels and shell and tube exchangers conforming to code and customer specifications. Quality Assurance
- Development of bills of material and shop notes meeting the customer's requirements and the specific requirements of the order in compliance with accepted practices and applicable industry codes.
- Assist in the preparation of pressure vessel standards. PROJECT COORDINATION (Weighting 40%)Project Oversight and Cross-Functional CollaborationTop of Form
- Managing pressure vessel projects and interfacing with designers, project engineers, supply chain, quality control department, and production to ensure deliverables are met.
- Works with the shop personnel and other departments to meet customer's assembly and production requirements.
- Provide regular updates to management of engineering status, drawings, and BOMs. Interdepartmental Collaboration
- Interface with support personnel from areas such as Purchasing, Production Control, Quality Control, and Document Control, to ensure fabrication operations support activities are carried out to meet customer expectations and requirements. DOCUMENTATION & COMPLIANCE (Weighting 20%)Coordination & Execution
- Developing and reviewing pressure vessel and shell and tube exchangers fabrication drawings, machining drawings, and bills of material.
- Assisting the supply chain with material quoting and ordering.
- Preparing and submitting required registration documentation as necessary.
- Initiation, review, and release of general arrangement, machining, fabrication, and assembly drawings to other departments and the customer. Safety & Compliance
- Adherence to quality control manual.
- Follow all company policies and safety procedures.
- Other duties are assigned from time to time.
- Bachelor's degree in Mechanical Engineering
- P.Eng or Professional Licensee (APEGA)
- 5+ Years of relevant experience
- Extensive Codes and Standards Knowledge/skills of ASME B31.3, ASME -BPVC Section VIII Division 1, Appendix II, CSA B51:19, TEMA, NACE.
- Knowledge of Compress and Compress Heat Exchangers
- Knowledge and experience in Welding and Fabrication.
- Excellent written and verbal skills.
- Good communication skills, proven discipline to carry out assigned tasks with little supervision and proven "Team Player." We offer competitive wages, training, flexible, dynamic, and exciting work environment.
-
Pressure Vessel Engineer
Found in: Jooble CA O C2 - 2 days ago
Startec Compression & Process and Startec Service Calgary, AB, CanadaABOUT US: · Startec Compression & Process is dedicated to providing innovative solutions to meet your unique challenges and opportunities. We are an integrated project and engineering equipment fabricator specializing in the modularized design and packaging of process, refrigera ...
-
Senior Project Manager
Found in: Appcast CA C2 A - 2 days ago
Acero Engineering Greater Calgary Metropolitan Area, CanadaAcero Engineering Inc. ("Acero"), a growing oil & gas facilities engineering company providing engineering, procurement and construction management expertise is currently seeking a motivated and enthusiastic individual to fill one role as Senior Project Manager years of experienc ...
-
Naval Architect
Found in: Jooble CA O C2 - 2 days ago
Startec Compression & Process and Startec Service Calgary, AB, CanadaWe are an integrated project and engineering equipment fabricator specializing in the modularized design and packaging of process, refrigeration, and rotating equipment solutions. Startec Compression and Process is currently recruiting an Intermediate Vessel Designer to work at o ...
-
Project Engineer
Found in: Jooble CA O C2 - 2 days ago
Luxfer Gas Cylinders Calgary, AB, CanadaLuxfer is a global industrial company, innovating niche application in materials engineering. Luxfer has pioneered the application of magnesium, zirconium, and carbon fiber in the healthcare, transportation, emergency response, defense, and aerospace markets. We have a global pr ...
-
Project Engineering
Found in: Jooble CA O C2 - 2 days ago
Luxfer Gas Cylinders Calgary, AB, CanadaLuxfer is a global industrial company, innovating niche application in materials engineering. Luxfer has pioneered the application of magnesium, zirconium, and carbon fiber in the healthcare, transportation, emergency response, defense, and aerospace markets. We have a global pre ...
-
Intermediate Project Engineer
Found in: Jooble CA O C2 - 1 day ago
Startec Compression & Process and Startec Service Calgary, AB, CanadaABOUT US: · Startec Compression & Process is dedicated to providing innovative solutions to meet your unique challenges and opportunities. We are an integrated project and engineering equipment fabricator specializing in the modularized design and packaging of process, refrigera ...
-
Project Engineer-In-Training
Found in: Jooble CA O C2 - 2 days ago
Startec Compression & Process and Startec Service Calgary, AB, CanadaABOUT US: · Startec Compression & Process is dedicated to providing innovative solutions to meet your unique challenges and opportunities. We are an integrated project and engineering equipment fabricator specializing in the modularized design and packaging of process, refrigera ...
-
Intermediate Piping Engineer
Found in: Talent CA A C2 - 2 days ago
Sacre Davey Engineering Calgary, AB, CanadaLocation: Remote with the ability to travel Full Time Permanent Company Description Sacré-Davey is a privately held, multi-disciplinary engineering and project management firm that services the mining, energy, and general industrial sectors. With offices in Canada, the United Sta ...
-
Senior Engineer
Found in: Talent CA C2 - 4 days ago
Foremost Calgary, CanadaABOUT THE OPPORTUNITY · Foremost is looking for an experienced Senior Engineer to be part of our Agriculture and Energy Design Team located at our facility in Lloydminster, Alberta. Are you a seasoned mechanical graduate with experience design tanks, pressure vessels, silos, or ...
-
Intermediate Piping Engineer
Found in: Adzuna CA C2 - 2 days ago
Sacre Davey Engineering Calgary, Canada permanentLocation: Remote with the ability to travel · Full Time Permanent · Company Description · Sacré-Davey is a privately held, multi-disciplinary engineering and project management firm that services the mining, energy, and general industrial sectors. With offices in Canada, the Un ...
-
Quality Specialist/SQS/Vendor Inspector
Found in: Jooble CA O C2 - 2 hours ago
PPI Quality & Engineering Alberta, CanadaThe primary responsibility of the Supplier Quality Surveillance Inspector is to perform QA/QC inspections during fabrication and manufacturing to ensure critical materials and engineered equipment purchased meet or exceed our customer's and contract quality and workmanship expect ...
-
inspecteur coating f/h
Found in: Jooble CA O C2 - 2 hours ago
PPI Quality & Engineering Alberta, CanadaThe primary responsibility of the Supplier Quality Surveillance Inspector is to perform QA/QC inspections during fabrication and manufacturing to ensure critical materials and engineered equipment purchased meet or exceed our customer's and contract quality and workmanship expect ...
-
Project Engineer
Found in: Talent CA C2 - 5 days ago
Luxfer Calgary, Canada Full timeLuxfer is a global industrial company, innovating niche application in materials engineering. Luxfer has pioneered the application of magnesium, zirconium, and carbon fiber in the healthcare, transportation, emergency response, defense, and aerospace markets. We have a global pre ...
-
Lead Mechanical Engineer
Found in: Talent CA C2 - 4 days ago
Equinox Engineering Ltd Calgary, Canada Full timeSummary: · Equinox Engineering is searching for a Lead Mechanical Engineer · 7-15 years EPCM experience in Oil and Gas Projects in a Lead role · Lead the mechanical team on the project · Check and approve other mechanical engineer's deliverables · Monitor project schedule and bu ...
-
B-Pressure Welder
Found in: Talent CA C2 - 4 days ago
Startec Compression & Process and Startec Service Calgary, Canada Full timePOSITION OVERVIEW: · Startec Compression & Process is currently recruiting a B-Pressure Welder to work at our Shepard Shop (9423 Shepard Rd SE, Calgary, AB, T2C 4R6). The B-Pressure Welder is responsible for performing complex welding tasks on Vessels and Exchangers, ensuring t ...
-
Project Engineer-In-Training
Found in: Talent CA C2 - 5 days ago
The Engineering Institute of Canada Calgary, CanadaABOUT US: · Startec is dedicated to providing innovative solutions to meet your unique challenges and opportunities. We are an integrated project and engineering equipment fabricator specializing in the modularized design and packaging of process, refrigeration, and rotating equ ...
-
Intermediate Project Engineer
Found in: Talent CA C2 - 1 day ago
The Engineering Institute of Canada Calgary, CanadaABOUT US: · Startec Compression & Process is dedicated to providing innovative solutions to meet your unique challenges and opportunities. We are an integrated project and engineering equipment fabricator specializing in the modularized design and packaging of process, refrigera ...
-
Project Engineer-In-Training
Found in: Talent CA C2 - 1 day ago
Startec Compression & Process and Startec Service Calgary, Canada Full timePOSITION OVERVIEW: · Startec is currently recruiting for a Project Engineer-In-Training (E.I.T.) to work at our Shepard Office (9423 Shepard Rd SE, Calgary, AB, T2C 4R6). This position will participate in Startec's rotation program where the successful candidate will rotate bet ...
-
Unit Inspector R&Rs
Found in: Jooble CA O C2 - 2 days ago
Spirit Omega Inc. Alberta, CanadaCompany Overview · Office Location: Strathcona, AB, Canada. · Contract Duration: 24 months to permanent. · Language: English. · Key Responsibilities: · Historian for the condition and previous workscope for all pressure piping and equipment covered by the Unit Inspector. · ...
-
Contract: Reservoir Engineer
Found in: Jooble CA O C2 - 2 days ago
Rge Pte Ltd Calgary, AB, CanadaContract Reservoir Engineer months) page is loaded Contract Reservoir Engineer months) · Apply locations Calgary time type Full time posted on Posted 7 Days Ago job requisition id R161208 Grow your career with us · John, British Columbia, Pacific Canbriam Energy Limited ("PCE") ...
Pressure Vessel Engineer - Calgary, Canada - Startec Compression & Process and Startec Service
Found in: Talent CA C2 - 3 days ago
Description
POSITION OVERVIEW:
Startec Compression and Process is currently recruiting a Pressure Vessel Engineer to work at our Shepard Office location (9423 Shepard Rd SE, Calgary, AB, T2C 4R6). Reporting directly to the Mechanical Engineering Lead this position is responsible for providing detailed engineering services for the design and construction of Pressure Vessels and Shell and Tube Exchangers. This person will manage all technical and manufacturing issues on multiple projects. As well as assist with the direction, development and improvement of the Engineering Department.KEY PERFORMANCE INDICATORS (KPI):
ENGINEERING DESIGN (Weighting 40%)Pressure Vessel Design & CalculationsQUALIFICATIONS:
Pressure Vessel Engineer professionals in Calgary
-
Sarbjeet Bhopal
Technical Support Professional
-
Khushi Dave
Data Scientist|Analyst|Engineer|ML Engg|BA
-
Wilson Ekpotu
Petroleum Engineer
-
Ankit Bhorania
Senior Process Engineer
-
Aaron Labovich
Crane, Transport, and Construction Engineer
-
Vahid Jahanshahi
FDP, Reserve, unconventional, simulation, EOR, WRM