- Performing sheet metal assembly operations that include a variety of complex parts, details, and assemblies
- Interpret drawings of completed parts and assemblies to develop tooling, assembly requirements and sequences to achieve the final product.
- Deburring and preparing raw materials for processing prior to forming
- Use of chemical compounds as specified in drawings, production orders or other documents to bond, insulate, protect and coat components / assemblies
- Layout, fabricate, assemble, install and rework a wide variety of semi-complicated parts and assemblies for experimental, production, and prototype assemblies
- Construct simple checking and holding fixtures and make simple templates and form blocks
- Assemble semi-complicated assemblies, perform riveting and close tolerance drilling and reaming
- Operate and use hand tools as required
- Ensure problems or required changes with components/assemblies are brought to the attention of the department supervisor
- Completion of High School or equivalent
- Completion of an Aircraft Structures course would be an asset
- 3 years' experience working in the assembly of metal components in an aerospace setting
- Experience using tools such as a bandsaw, sheet metal brake (manual + NC), punches, shear, sander, grinder
- Installing and removing rivets
- Extensive knowledge of fasteners and hardware; their selection, requirements, properties and use
- Excellent time management skills meet approaching deadlines
- Multitasking's skills and able to prioritize
- Independent and the ability to work under broad supervision
- Customer oriented
- Flexible and able to adapt to a fast paced environment
- Exemplary problem-solving skills
- Highly motivated self-starter
-
Composite Assembly Technician
5 days ago
Airbus Fort Erie, CanadaCarry out the preparation of parts of variable dimensions using the techniques of molding, by stratification of pre-impregnated fabrics, by stratification of dry fabrics with resin impregnation, and by injection or infusion of resins (high performance composite materials of the t ...
-
Fabrication,assembly,bond Technicians
2 weeks ago
Fleet Canada Inc Fort Erie, CanadaAssembly Fitters · This is an hourly position in which you are responsible for ensuring the work is performed to drawing dimensions and customer specifications. Parts are assembled using a wide variety of techniques, both pre-fabricated and composite materials. Must have knowledg ...
-
Sheet Metal Technician Assembly
3 weeks ago
Airbus Canada Fort Erie, CanadaThe Sheet Metal Technician - Assembly is responsible for the buildup of components through combinations of mechanical, chemical or other means into completed assemblies meeting dimensional, physical, electrical and optical requirements. · Manufacturing Detailed Parts · Performing ...
-
Composite Assembly Technician
5 days ago
airbus Fort Erie, Canada Full timeJob Description: · Carry out the preparation of parts of variable dimensions using the techniques of molding, by stratification of pre-impregnated fabrics, by stratification of dry fabrics with resin impregnation, and by injection or infusion of resins (high performance composite ...
-
Sheet Metal Technician Assembly
2 weeks ago
Airbus Canada Fort Erie, Canada Full timeThe Sheet Metal Technician - Assembly is responsible for the buildup of components through combinations of mechanical, chemical or other means into completed assemblies meeting dimensional, physical, electrical and optical requirements. · Manufacturing Detailed Parts · Performin ...
-
Quality Assurance Composite Assembly Inspector
3 weeks ago
Airbus Canada Fort Erie, CanadaMAIN RESPONSIBILITIES · Assembly Inspection/Paint Inspection · Visual Inspection · Verify potting material shelf life · Verify that inserts, components, etc. are installed as per drawing. · Visual Inspection for improper or insufficient coverage, rough surfaces, pitting. · Dust i ...
-
Electronics Technician
2 weeks ago
RMC INC Fort Erie, CanadaElectrical and Electronics Engineering Technologists and Technicians may work independently or provide technical support and services in the design, development, testing, production and operation of electrical and electronic equipment and systems. They are employed by electrical ...
-
Quality Assurance Composites Inspector
3 weeks ago
Airbus Canada Fort Erie, Canada22 November 2023 · Industries Aérospatiale, Aviation Défense · Catégories Banque, Assurance, Services financiers, · Fort Erie, ON - Temps plein · **MAIN RESPONSIBILITIES**: · Assembly Inspection/Paint Inspection · Visual Inspection · Verify potting material shelf life · Verify th ...
-
Sheet Metal Technician
3 weeks ago
Airbus Fort Erie, Canada**The Sheet Metal Technician - Assembly is responsible for the buildup of components through combinations of mechanical, chemical or other means into completed assemblies meeting dimensional, physical, electrical and optical requirements.** · **MAIN RESPONSIBILITIES** · **Manufac ...
-
Quality Assurance Composites Inspector
3 weeks ago
Airbus Fort Erie, Canada**MAIN RESPONSIBILITIES** · **Assembly Inspection/Paint Inspection** · - **Visual Inspection** · - **Verify potting material shelf life** · - **Verify that inserts, components, etc. are installed as per drawing.** · - **Visual Inspection for improper or insufficient coverage, rou ...
-
Repair and Overhaul Technician
2 weeks ago
Airbus Fort Erie, Canada**_WE'RE LOOKING FOR A REPAIR AND OVERHAUL TECHNICIAN _** · **_POSITION LOCATION: FORT ERIE, ONTARIO _** · The Repair and Overhaul Technician is responsible for completing initial assessment and paperwork of incoming components and expediting the completion of repair and overhaul ...
-
Repair & Overhaul Technician
3 weeks ago
Airbus Fort Erie, CanadaThe Repair and Overhaul Technician is responsible for completing initial assessment and paperwork of incoming components and expediting the completion of repair and overhaul work while ensuring on time, on cost, and on quality. The Repair and Overhaul Technician adheres to intern ...
-
Repair and Overhaul Technician
3 weeks ago
Airbus Helicopters, Inc Fort Erie, Canada**_WE'RE LOOKING FOR A REPAIR AND OVERHAUL TECHNICIAN_** · **_ POSITION LOCATION: FORT ERIE, ONTARIO_** · The Repair and Overhaul Technician is responsible for completing initial assessment and paperwork of incoming components and expediting the completion of repair and overhaul ...
-
Composite Tooling Technician
3 weeks ago
Airbus Canada Fort Erie, CanadaThe Composite Tooling Technician is responsible for the production ready state of all tooling; including masters, moulds, jigs, fixtures, templates and production aides. The incumbent will also provide recommendations for safety improvements, cost savings and new tooling initiati ...
-
Aircraft Structures Ame
2 weeks ago
Airbus Helicopters, Inc Fort Erie, Canada**_WE'RE LOOKING FOR AN AIRCRAFT STRUCTURES AME_** · **_ POSITION LOCATION: FORT ERIE, ONTARIO_** · The Aircraft Structures AME is responsible for installing structural components and modifications, repairing/troubleshooting customer or company owned aircraft and assisting with t ...
-
Repair and Overhaul Technician
5 days ago
Airbus Helicopters, Inc Fort Erie, Canada**_WE'RE LOOKING FOR A REPAIR AND OVERHAUL TECHNICIAN_** · **_ POSITION LOCATION: FORT ERIE, ONTARIO_** · The Repair and Overhaul Technician is responsible for completing initial assessment and paperwork of incoming components and expediting the completion of repair and overhaul ...
-
Painter (General Production)
3 weeks ago
Cam Tran Co. Ltd Colborne, Canada**Location: Colborne, ON** · **Cam Tran Co Ltd is hiring full time permanent employees** · For those of you who don't know who we are, we are the manufacturer of distribution transformers In other words we are an extension of essential services and key component to keeping everyo ...
-
Mechanical Assembler
3 weeks ago
Rexroth Welland, CanadaCompany Description · Why work with Bosch Rexroth Canada? · - ** Challenging Projects**: We are driven by innovation and being at the cutting edge of everything that we do. At Bosch Rexroth every day is different and your time will be filled with interesting and exciting projects ...
-
Service Technician
1 week ago
HYDAC CORPORATION Welland, Canada**Position Summary**: · We are looking for a junior level Hydraulic Service Technician. The Hydraulic Technician will be responsible for inspecting, assembling, repairing, installations, and commissioning of hydraulic, lubrication, and/or process systems or sub-systems at the fac ...
-
Field Service Technician Ii
3 weeks ago
AGS, LLC Niagara Falls, Canada**Job Summary**: · The Field Service Technician II has a proven electronics background with at least 2 years' experience in a lesser role or 3 years' experience in a casino technical role. This position is responsible for the service, installation, conversion, upgrade and prevent ...
Sheet Metal Technician Assembly - Fort Erie, Canada - airbus
Description
Job Description:
The Sheet Metal Technician - Assembly is responsible for the buildup of components through combinations of mechanical, chemical or other means into completed assemblies meeting dimensional, physical, electrical and optical requirements.
Manufacturing Detailed Parts
Maintaining Records/Reports & Staying on Schedule
Education:
Experience:
Knowledge, Skills, Demonstrated Capabilities:
Must be able to legally work in Canada
This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth.
Company:
Airbus Helicopters Canada LtdEmployment Type:
Permanent-------
Experience Level:
ProfessionalJob Family:
Metal Worker
