sabri ZEMITH

SENER Engineering and Consulting - Riyadh, Saudi Arabia                                                                                                                                                                             Since July 2020

Senior Quality, Specifications & Policies, Technical Support Specialist 

Duties:

• Supervises and documents the enforcement of the Project management team, the total quality management regulations, Standardization, and procedures to support the Royal Commission Headquarter RCJY Operational Excellence department.

• Manages and documents the conducted cost reviews and supports operational excellence by recommending measures and initiatives to optimize costs.

• Oversees and documents the setting of all Royal Commission Headquarters RCJY Project Management, Quality and Specifications.

• Design (from scratch) and implement the Total Quality Management, and Project management best practices.

• Coordination of the Quality Management initiatives, review of the Royal commission Manuals, procedures and Contracts templates, and Biding processes.

• Overseeing Quality Management program teams, ensuring adequate continual improvement, Training, and audits according to ISO 9001 and ISO 19011.

• Effective management solutions to increase and improve the efficiency and outcome of the Royal Commission projects, Review Projects dashboards, and propose best solutions.

• Organize the coordination meetings and support the Royal Commission Team, 

FAEC Engineering Consultants - Khobar, Saudi Arabia November 2018- June 2020

Corporate QHSE Manager 

Duties:

• Develop and implement the Quality Management System according to ISO 9001:2015.

• Establish Company Quality Plan including Quality Policy (based on Corp. QHSE Policy) and continually improve it.

• Demonstrates the achievement of quality objectives and targets.

• Coordinate with all personnel assigned to the company in establishing an overall

Company Quality Management Plan based on Company QHSE Management standards and Project requirements.

• Advice on setting up the improvement guidelines for Company's Quality Management System for employees.

• Ensure improvements are implemented and results are feedback to employees.

• Responsible for ensuring that Company Quality Management policy, plans, and procedures are implemented effectively and suitable for the purposes and use for which they are intended.

• Develops the existing Quality Management System as necessary with additional procedures/instructions.

• Establish a Project Quality audit program & schedule and perform the Project Quality Audit within the project organization audits according to ISO 9001 and ISO 19011.

• Report the Project Quality Audit Results to CEO and Projects Manager.

• Monitor Company Quality System activities such as Site Quality activities based on the Company’s Management system and Project requirements.

• Responsible for QHSE and document control staff.

• Coordinate and communicate with Clients on QHSE issues.

• Produce and develop the QHSE Training Plan. Ensure implementation of the plan, and records are maintained.

• Report the performance status of QHSE activities and relevant issues to the CEO and Projects Manager. 

• BIM Coordination follow-up in case of interdisciplinary clashes.

• Ensure adequacy of the Quality Management with the Project Design Criteria, Engineering, Procurement, Construction, and Pre-Commissioning/Commissioning phases of the Projects.

• Ensure that the project meets international standards.

• Develops KPIs and ensures consistency in reporting across the Corporate QHSE.

ARCHEN ENGINEERING AND CONSULTING- Riyadh, Saudi Arabia           April 2015-October 2018

SENIOR QUALITY SPECIALIST 

Duties:

• Project Cycle Management (PCM) review & follow-up.

• Direct supervision of special projects of the Ministry of Interior.

• Control Projects Request for Proposal (RFP), drawings, Bills of Quantities (BOQs), specifications, and contracts according to project requirements and standards.

• Control the Minimum Technical Requirements (MTR) of new projects.

• Procedures elaboration, implementation, and follow-up.

• Actively promote the audits, elaborate the annual audit plan, and organize and lead audits according to ISO 9001 and ISO 19011.

Technoscan 3D Engineering and Consulting - Algeria         January 2014 - April 2015

Technical Manager 

Duties:

• Manage all the company's technical affairs,
• Coordinate with the authorities to maintain the company's certifications updated.
• Provide clients with the necessary technical support.
• Ensure the conformity of all services with clients' and government regulations and standards.
• Lead and manage the technical staff.

Pizzarotti - Abu Dhabi, United Arab Emirates    July 2010-December 2013

Project QA/QC & HSE Manager 

Duties:

Rail Project: Tramway of Constantine Algeria 450 million Euro- 10 km tramway railway, Piling, concrete slabs, - Bridge 700 m long and 50 meters high. - Stadium 8000 spectators, with a full metallic carpentry roof. - 07 walls with ground anchors 60 meters long and 12 meters high. Lead and tutor 12 QC Engineers, 3 QA Engineers, HSE Team, Lab Manager, 6 Technicians and 2 Geologists.

Reporting to Project Manager and Corporate Pizzarotti Quality Manager in Italy Headquarters.

• Project Quality Plan PQP elaboration, implementation, and follow-up.

• Inspection Test Plan (ITP) elaboration according to the project specifications and standards procedures elaboration, implementation, and follow-up.

• Assist the engineering office & project process to achieve the operations on time according to the planning and project specifications.

• Ensure that project contract requirement is in line with company quality requirements, objectives, and systems.

• Ensuring the good use of the last version of procedures and drawings on site.

• Develop and deploy on-site all necessary and supplementary documentation related to QA/QC to achieve correct activities according to project specifications.

• Evaluate and identify the non-compliances, open NCRs and propose solutions and follow the progress of actions to close NCRs, provide recommendations.

• Actively promote the internal and external audits, elaborate the annual audit plan, organize and lead audits (prepare checklists and all necessary documents for the audits) site visits with subcontractors, and suppliers to evaluate the improvement progress.

• Ensure that traceability is respected.

• Examination of incoming quality reports, and materials testing reports and inform key persons about the deficiencies if exist and propose solutions/quick actions and follow-up their execution.

• Ensure and promote the good communication of quality policy and all documents related to QA/QC for all project key persons.

• Evaluate and report to the top management the status of quality performance indexes.

• Coordination with 3rd party laboratory regarding all lab activities on site.

• Coordination with the client-consultant on weekly basis for quality process Improvement.

• Review work procedures, ITPs, materials approval reports, and all necessary QA/QC documents contractors and subcontractors requested by consultants.

• Ensure that subcontractors are using good drawings and procedures on-site.

• Ensuring the follow-up of standards evolutions or changes.

• Ensure that the sampling is done correctly by laboratories as per ITP, correct materials are used on-site, and good work practices are being adhered to the relevant project specifications and standards.

• Supervising and following up on on-site lab activities, and equipment calibration follow-up.

• Examination of invoices (laboratory tests and hired technician's timesheet).

• Promote team working and professional behavior within the quality department.

• Ensure the compliance of all quality department staff to HSE specifications, procedures, and policy.

VINCI Grand Projets - Doha, Qatar                                August 2009-June 2010 

Senior QA/QC Engineer 

Duties:

• Verify the implementation efficiency of the Project Quality Plan, and report deficiencies, if exist, to the QA/QC manager, provide recommendations and follow up on their execution.

• Assist the engineering office & project process to achieve the operations on time according to the planning and Vinci requirements and project specifications.

• Verify that project contract requirements are in line with company quality requirements, objectives, and systems.

• Ensure the availability of necessary QA/QC documents with the latest version on sites, such as the procedures and technical documents.

• Ensure that project contract requirement is in line with company quality requirements, objectives, and systems.

• Prepare QA/QC reports, identify deficiencies, if exist, and provide recommendations.

• Coordination with the client-consultant daily and participate in the weekly coordination meetings to evaluate the improvement of the quality process.

• Evaluate and identify non-compliance to the company and project specifications, open NCRs and propose solutions and follow the progress of actions to close NCRs.

• Promote internal and external audits, verify, and apply annual audit plan, and organize, and lead audits (prepare checklists, if necessary, and all necessary documents for the audits) and site visits, subcontractors, and suppliers to evaluate the improvement progress.

• Ensure that all records were stored according to company policy; ensure that traceability is respected.

• Ensure the coordination and respect of the inspection test plan on-site by the 3rd party laboratories Exova/ Aces.

• Examination of incoming QA/QC reports & materials testing reports; advise and follow up on their corrective actions.

• Examination of invoices (laboratory testing and hired technicians working timesheet).

• Supervising and following up on the site lab activities, and equipment calibration follow-up.

• Examination of the request for inspection (RFIs) before sending it to the consultant.

• Achievement of quality activities and material daily inspections.

• Follow-up of the RFIs status progress.

• Coordination and follow-up with other departments for the corrective actions needed in case of comments or rejection of the RFIs.

• Material approval request (MAR) and Equipment inspection plan (EIP).

• Examination of the EIP and MAR documents before submitting them to the consultant.

• Follow-up and record EIP and MAR status progress.

• Ensuring the good and correct application of the EIPs on site.

• Supervising QA/QC Engineers and Material Inspectors to provide them with all necessary support.

• Promote team working and professional behaviors.

• Ensure the compliance of the quality team to HSE specifications, procedures, and policies.

SNC LAVALIN - Doha, Qatar                                       November 2008-July 2009

Project Senior Quality Control Engineer 

Qatalum Alumina project, Structures achieved: construction of the Qatalum Harbor and Silo's by slip forming, big mass concrete foundation at the port area for pumping station at mesaeed industrial harbour, also classical structure and building framework, slab, shear wall, and big columns for alumina factory.

Duties:

• Assist the engineering & project process to achieve the operations on time according to the planning and company requirements and project specifications.

• Verify that project contract requirements are in line with company quality requirements, objectives, and systems.

• Ensure the availability of necessary quality documents with the latest version on sites, such as procedures and technical documents.

• Prepare quality reports, if necessary.

• Evaluate and identify non-compliance to the company and project specifications, open NCRs and propose solutions and follow the progress of actions to close NCR.

• Promote internal audits, apply annual audit plan, organize and lead audits (prepare checklists if necessary and all necessary documentation for audits), and site visits, subcontractors, and suppliers to evaluate the improvement progress.

• Ensure that traceability is respected.

• Ensure the coordination and respect of the inspection test plan on-site by 3rd party laboratories.

• Examination of incoming QA/QC reports & materials testing reports; provide recommendations and follow up on their execution.

• Examination of invoices (laboratory testing and hired technicians working timesheet).

• Supervising and following up on the site lab activities, Equipment calibration follow-up.

• Examination of the request for inspection (RFIs) before sending it to the consultant.

• Achievement of quality activities and material daily inspections.

• Follow-up of the RFIs status progress.

• Coordination and follow-up with other departments for the corrective actions needed in case of comments or rejection of the RFIs.

• Material approval request (MAR) and Equipment inspection plan (EIP).

• Follow up and record EIP and MAR status progress.

• Ensuring the good and correct application of the EIPs on site.

INSA University- Lyon, Rhône-Alpes, France                                                                 2001-2002

Master of Science in Civil & Construction materials

INSA University, Lyon France, Master of Science in Civil & Construction materials (INSA Lyon is ranked among the top universities of Science and Technology in Europe)

École Polytechnique ENP - Algiers, Algeria                                                                                        1994-2000

Civil Engineer

École Polytechnique ENP, Algiers Algeria. Civil Engineer (state-supported institution of higher education and research,