- Provide weekly KPIs and priorities for every Inspector on Manufacturing ( Intermediate and Final) and Receiving Inspections based on the Dispatch list.
- Ensure the weekly KPIs are met and take corrective actions to address any anomalies.
- Managing any backlog with OT as needed.
- Proactively identifying risks in the department to the attention of the Head of Quality.
- Creation, approval and revision of Inspection Documents.
- Ensure all Inspectors are adequately trained on Inspection Documents.
- Ensure the validations of all First Article Inspections (FAIs) for all new / modified parts / products / kits manufactured by AHCA.
- Supervise the creation and revision of Quality Assurance documentation (Delivery Documents, PVL, Demande d' Accord).
- Initiate NCs with Inspectors in a timely manner and manage containment of identified NCs.
- Lead and support Cost of Non Quality KPIs by proactively engaging in timely Root Cause and Corrective Actions, Implementation of Curative and Corrective Actions and Improvement Workshops.
- Ensure calibrated equipment assigned to QA are managed and returned for calibration on time.
- Liaise with Manufacturing Engineering and AHCA Engineering for the satisfactory disposition of NCR's.
- Support role in authoring of Technical Notes and other planned deviations or Standard Repair documentation.
- Support the review and ensure that processes are compliant to specifications for composite part manufacturing.
- Support all Manufacturing Technicians in coaching them on the Inspection Acceptance Criteria.
- Ensure tooling definition delivers expected part quality level, participate in the review of new tooling definition and documentation, conduct tooling conformity inspection and recurrent inspection
- Participate in the validation and selection of materials, advise on part makeup (lay-up, bonding, surface protection) and cure cycles.
- Participate as needed for Design Change Requests affecting composite manufacturing.
- Provide oversight and feedback for AHCA generated manufacturing instructions to ensure compliance to engineering drawings.
- Participate in the review, bid process of manufacturing work packages and interpretation of drawings, material specifications, manufacturing processes, etc., during the setup for new manufacturing.
- Support Manufacturing Inspection related Internal and External Audit findings by identifying effective process based root causes and corrective actions.
- Identifying opportunities to mitigate risks related to Human Factors.
- Supporting all Objectives pertinent to Aviation Safety, Operational Health & Safety and Environmental Safety.
- Conduct performance reviews for all inspectors and maintain their time cards including vacation requests and sick day approvals.
- Identify relevant Quality Assurance Manufacturing Inspection training needs/opportunities
- Proactively identify Manufacturing inspection risks and propose improvements to mitigate them.
- Advocate and champion decisions based on data and support all Cost of Non Quality KPIs.
- Advocate decisions based on identification of clear and objective requirements in Quality.
- Promote and advocate quality achievement and performance improvement across the organization
- College Diploma or equivalent in work experience & technical training
- 5 years' experience in composite component manufacturing environments, preferably in aerospace.
- 5 years' experience in the Quality Assurance field
- 3 years' experience in a supervisory capacity considered an asset
- Accurate, clear and timely completion of tasks necessary to develop aeronautical products.
- Strong initiative and motivation necessary to work independently and in a team environment to drive development to achieve the highest standard of quality.
- Ability to learn, understand and follow departmental and company procedures.
- Ability to bring the context of long term strategic objectives and goals and apply them to day to day activities and decisions making.
- Sound understanding of Quality Systems.
- High level of understanding of the composite manufacturing and repair processes necessary to implement necessary controls and support all associated departments. Also assist in the production and improvements of components, analysis of processes and repairs to work in process.
- Good understanding of CAD system, (CATIA V5 basics)
- High level of understanding of AH material and process specifications
- Ability to prepare and present comprehensive reports on Manufacturing Quality to customers (Airbus Helicopter) and Management
-
Composite Tooling Technician
Found in: Talent CA C2 - 5 days ago
airbus Fort Erie, Canada Full timeJob Description: · The Composite Tooling Technician is responsible for the production ready state of all tooling; including masters, moulds, jigs, fixtures, templates and production aides. The incumbent will also provide recommendations for safety improvements, cost savings and n ...
-
Financial Analyst
Found in: Talent CA C2 - 6 days ago
airbus Fort Erie, Canada Full timeJob Description: · WE'RE LOOKING FOR A FINANCIAL ANALYST · POSITION LOCATION: FORT ERIE, ON · The Financial Analyst is responsible for the pricing rules, pricing all products and services, provided by Airbus Helicopters Canada Limited ("AHCA") and monitoring of the departmental g ...
-
Director, Legal Services
Found in: Talent CA C2 - 10 hours ago
Legacy Executive Search Prtnr Fort Erie, CanadaOverview / Background · The Town of Fort Erie bridges big city entrepreneurial opportunities with small-town charm and lifestyle. Quality of life is incomparable with its strong values, a dynamic work environment and easy access to modern amenities complemented by small-town ambi ...
-
Composite Tooling Technician
Found in: beBee S2 CA - 2 weeks ago
Airbus Canada Fort Erie, Canada Full timeThe Composite Tooling Technician is responsible for the production ready state of all tooling; including masters, moulds, jigs, fixtures, templates and production aides. The incumbent will also provide recommendations for safety improvements, cost savings and new tooling initiati ...
-
Chief Quality Inspector
Found in: beBee S2 CA - 19 hours ago
Fleet Canada Inc Fort Erie, Canada OTHERJob Summary: · A Chief Inspector oversees and coordinates inspection activities, ensuring compliance with regulations and standards. You will be responsible for ensuring that our products meet the highest quality standards through thorough inspections and data analysis. Your exp ...
-
Plant Engineer
Found in: Talent CA C2 - 10 hours ago
Canada Colors and Chemicals Limited Colborne, Canada Full time: CCC is proud of its 100+ years serving the Canadian Industry both in the distribution and manufacturing markets. A privately held Canadian Company, we are a successful supply chain partner providing "Intelligent Delivery" of products and solutions to the Industrial, Environmen ...
-
Buyer
Found in: Talent CA C2 - 2 hours ago
Canada Colors and Chemicals Limited Colborne, Canada Full time: JOB POSTING CCC is proud of its 100+ years serving the Canadian Industry both in the distribution and manufacturing markets. A privately held Canadian Company, we are a successful supply chain partner providing "Intelligent Delivery" of products and solutions to the Industri ...
-
Extruder Operator
Found in: Talent CA C2 - 10 hours ago
Canada Colors and Chemicals Limited Colborne, Canada Full time: JOB POSTING · CCC is proud of its over 100 years serving the Canadian Industry both in the distribution and manufacturing markets. A privately held Canadian Company, we are a successful supply chain partner providing "Intelligent Delivery" of products and solutions to the I ...
-
Extruder Operator
Found in: Talent CA C2 - 3 days ago
CCC Colborne, CanadaJOB POSTING · CCC is proud of its over 100 years serving the Canadian Industry both in the distribution and manufacturing markets. A privately held Canadian Company, we are a successful supply chain partner providing "Intelligent Delivery" of products and solutions to the Indust ...
-
Buyer
Found in: Talent CA C2 - 2 hours ago
CCC Colborne, CanadaJOB POSTING · CCC is proud of its 100+ years serving the Canadian Industry both in the distribution and manufacturing markets. A privately held Canadian Company, we are a successful supply chain partner providing "Intelligent Delivery" of products and solutions to the Industrial ...
-
2nd Class Power Engineer
Found in: Talent CA C2 - 5 days ago
Oxy Niagara Falls, Canada2nd Class Power Engineer Description Contribute. Grow. , action-oriented, safety driven chemical manufacturing company continually striving to be the best in the business while staying focused on environmental protection. The secret to our success has and will continue to be our ...
-
Mechanical Designer
Found in: Talent CA C2 - 10 hours ago
itec group, Inc. Niagara Falls, Canada Direct HireWe are seeking an experienced Mechanical Designer to join our client's team. As a Mechanical Designer, you will be responsible for leading the design and development of complex mechanical systems and components for our company's products. · Key Responsibilities · Design Developm ...
-
SCADA Developer
Found in: Talent CA C2 - 10 hours ago
itec group, Inc. Niagara Falls, Canada Direct Hire· We are seeking an intermediate-level SCADA Developer for an established client based in the Niagara Region. Our client offers a competitive wage, a hybrid work structure, and career advancement. · Responsibilities & Qualifications SCADA software programming (Intouch, FactoryTa ...
-
Millwright
Found in: Talent CA C2 - 10 hours ago
itec group, Inc. Welland, CanadaMillwright · We have partnered with one of the Niagara region longest operating manufacturers in their search for two Heavy Industrial Millwrights · What they offer:Great RRSP package and pension · Competitive hourly rate, OT after 40 · What you bring to the table (snapshot):M ...
-
Plant Manager
Found in: Talent CA C2 - 2 hours ago
MyKelly St. Catharines, Canada Full timeJob Title: Plant Manager · Position Type: Permanent, Full-time · Pay Range: $100,000- $110,000 per year, Benefits, RRSP Match, & Bonus · Shifts: Steady Days; 7:00am- 3:30pm · Work Location: St. Catharines, ON · Summary · The Plant Manger plays a critical role in the success of o ...
-
Quality Control Associate
Found in: Talent CA C2 - 3 days ago
Wesco Colborne, Canada Full timeWe are seeking a Quality Control Associate to join our team and bring a fresh set of eyes to our process improvement efforts As a Quality Control Associate, you will be responsible for maintaining a Quality Plan with our customers to cover an inspection process of materials and/o ...
-
Cabinet Factory Material Cutlist Processor
Found in: Talent CA C2 - 10 hours ago
Closets by Design Niagara Niagara-on-the-Lake, CanadaMaterial Cutlist Processor (CAD) · Closets by Design is a nationally recognized leader in home organizing systems. · We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall-beds, garage cabinetry and more. · We are current ...
-
Millwright
Found in: Talent CA C2 - 2 hours ago
Tilray St. Catharines, CanadaMillwright - Fenwick, ON · About HEXO Corp & Tilray Brands Inc. · HEXO Corp is a subsidiary of Tilray Brands, Inc, a leading global cannabis-lifestyle and consumer packaged goods company with operations in Canada, the United States, Europe, Australia, and Latin America that is c ...
-
Plant Manager I
Found in: Talent CA C2 - 5 days ago
Chemtrade Dalhousie, CanadaJob Description · Position: Plant Manager I · Primary Location: Dalhousie, NB · Schedule: Full time - Monday to Friday – 40 hours work week. · Reports to: Regional Manager · Compensation: $100,000 - $115,459.83 per annum · The Canadian base salary range for this position is $ ...
-
Clinical Field Service Engineer
Found in: Talent CA C2 - 10 hours ago
Hickey's Pharmacy Pelham, Canada Full timeThe Closing Date for Applications is Tuesday, 7th May 2024 · Purpose of Role: · This role will be a Field based Service Engineer providing technical support in relation to a wide range of medical devices and related medical equipment to existing and new customers across Ireland ...
Supervisor, Manufacturing Quality - Fort Erie, Canada - Airbus Canada
Description
MAIN RESPONSIBILITIES
Quality Control Responsibilities
Quality Assurance Responsibilities
Identify and Implement Process Improvements
EDUCATION & JOB REQUIREMENTS
This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth.
Company:
Airbus Helicopters Canada LtdEmployment Type:
Permanent-------
Experience Level:
ProfessionalJob Family:
LeadershipBy submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.
Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to
At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
