- Install and terminate conduit, cable, equipment, panels, sensors, and various control components and devices.
- Construct and fabricate control panels and rough and finish wiring and control systems.
- Install interlocking wiring and perform wiring check out.
- Install system components and wiring in compliance with the NEC, NESC, NFPA and the UFC.
- Install, troubleshoot, repair, and maintain electrical control circuits for motors and control devices for various electrical devices.
- Provide material take-offs for electrical facilities equipment requirements.
- Propose changes or modifications to plans to enhance operation and efficiency of systems plans and specifications for facilities.
- Ensure accuracy and completion of assigned tasks and projects.
- Test installed/repaired/modified equipment for proper performance.
- Clean, lubricate, and perform other maintenance work.
- Keep detailed and accurate maintenance reports and documentation.
- Maintain a working knowledge of changes in technology, compliance, and repair techniques.
- Monitor parts usage and report on any materials issues.
- Assist in preparing preventative and predictive maintenance schedules.
- Performs all duties in accordance with Silent-Aire Limited Partnership safety program standards and Alberta Occupational Health and Safety Act, Regulations, and Code.
- Perform other duties as assigned.
- Registered as an apprentice electrician in Alberta and enrolled in a recognized trade school.
- Ability to work under the supervision of journeyman electricians, as part of a team, and independently in a busy environment.
- Experience with routine electrical maintenance operations an asset.
- Highly flexible, with solid interpersonal skills that allow one to work effectively in a diverse working environment.
- Able to effectively communicate both verbally and in writing.
- Able to work well under pressure.
- Strong attention to detail.
- Able to deal with people sensitively, tactfully, diplomatically, and professionally at all times.
- Dental care
- Extended health care
- Life insurance
- On-site parking
- RRSP match
- Vision care
- 12 hour rotating shift
- Day shift
-
Electrical Apprentice 2nd Year
1 hour ago
Johnson Controls Nisku, Canada**2nd year Electrical Apprentices** · Our experienced and energetic team delivers flexible design, advanced systems, and solutions for the most complex HVAC challenges. · Motivated by innovation and success, we aim to drive change in our industry, challenge the status quo, and be ...
-
Pipefitter Apprentice 2nd& 3rd Year
1 hour ago
Silent Aire Nisku, Canada**Apprentice Pipefitter** · **Title**:Apprentice Pipefitter · **Department**:Production · **Reports To**:Pipe Supervisor · **Overview** · The Apprentice Pipefitter will be responsible for assisting the Journeyman Pipefitter and Welders in spool assembly. Shop experience is an ass ...
-
3rd and 4th Year Electrical Apprentice
1 hour ago
Silent Aire Nisku, CanadaSilent Aire is looking for new team members to join our organization. If you a person who would like to be with your family every night and work indoors? This may be for you. · What we're looking for: · Electrical Apprentice · 3rd and 4th year Electrical Apprentice · Valid Bluebo ...
-
1st, 2nd or 3rd Year Welding Apprentice
1 hour ago
Allen's Transport Ltd. Leduc, Canada_**Allen's Transport **_**... Join a team that cares** · - Our transportation company started as a small fleet in 1991 near Edmonton, _ · - Alberta. Over the years we have continued to grow with a second branch opening in Calgary, in 2016. Our dedication and hard work have enable ...
-
1st or 2nd Year Apprentice
1 hour ago
Go Auto Edmonton, Canada**Job Description**: · Are you an auto repair master in training? · You need a shop that will go ABOVE and BEYOND to help you learn. A place that makes TRAINING YOU their priority, and won't stop until YOU REACH SUCCESS · Look no further · The opportunity of your dreams is here, ...
-
1st Year Welding Apprentice
1 day ago
Scott Steel Ltd Edmonton, CanadaStructural and Miscellaneous steel fabricator looking for 1st year welding apprentice. · - CWB certified in MCAW · - Read and interpret blueprints · - Reliable and punctual · - Overhead crane experience an asset · - Punctual, Hardworking individual looking to progress career in m ...
-
Plumber Apprentice 2nd Year
22 hours ago
Johnson Controls International Sherwood Park, Canada Full time**Title**: · Apprentice Plumber 2nd Year · **Reports To**: · Plant Manager · **Overview** · The Apprentice Plumber will assist the Journeyman Plumber(s) in installation, maintenance, and repairs associated with plumbing and heating requirements for a large manufacturing environme ...
-
Plumber Apprentice 3rd Year
1 hour ago
Gateway Mechanical Services Edmonton, CanadaAt Gateway, the extraordinary is possible to achieve in the role of Plumbing Apprentice · At Gateway Mechanical, we're focused on providing the best possible customer service in safe, effective, and innovative ways. · Founded in 1968, Gateway Mechanical is a privately owned compa ...
-
Plumber Apprentice 1st Year
6 days ago
Johnson Controls International Nisku, AB, Canada Full timeTitle: · Apprentice Plumber 1st Year · Reports To: · Plant Manager · Overview · The Apprentice Plumber will assist the Journeyman Plumber(s) in installation, maintenance, and repairs associated with plumbing and heating requirements for a large manufacturing environment. · ...
-
3rd Year Apprentice Welder
5 days ago
Johnson Controls International Nisku, Canada Full timeApprentice Welder 3rd Year · Department: · Welding · Reports To: · Welding Supervisor · Overview · The Apprentice Welder is responsible for the fabrication of custom prototypes from supplied drawings, fabrication of custom jigs and fixtures to produce production parts that meet c ...
-
3rd Year Apprentice Welder
1 week ago
Johnson Controls International Nisku, AB, Canada Full timeTitle: · Apprentice Welder 3rd Year · Department: · Welding · Reports To: · Welding Supervisor · Overview · The Apprentice Welder is responsible for the fabrication of custom prototypes from supplied drawings, fabrication of custom jigs and fixtures to produce production p ...
-
Electrical Apprentice 2nd Year
3 days ago
Johnson Controls International Nisku, AB, CanadaOverview · The 2nd and 3rd year Apprentice Electricians are primarily responsible for installing and terminating conduit, cable, equipment, panels, sensors, and various control components and devices for Silent-Aire Limited Partnership. This position constructs and fabricates co ...
-
3rd Year Apprentice Welder
5 days ago
Johnson Controls International Nisku, AB, Canada Full timeApprentice Welder 3rd Year · Department: · Welding · Reports To: · Welding Supervisor · Overview · The Apprentice Welder is responsible for the fabrication of custom prototypes from supplied drawings, fabrication of custom jigs and fixtures to produce production parts that ...
-
Electrical Apprentice 2nd Year
1 day ago
Johnson Controls International Nisku, Canada Full timeOverview · The 2nd and 3rd year Apprentice Electricians are primarily responsible for installing and terminating conduit, cable, equipment, panels, sensors, and various control components and devices for Silent-Aire Limited Partnership. This position constructs and fabricates con ...
-
2nd year Electrical Apprentice
18 hours ago
Johnson Controls Nisku, Canada Full timeElectrical Apprentices · Silent-Aire systems have been designing and manufacturing Custom HVAC systems for over 25 years. We specialize in the Healthcare, Industrial, and Data Center markets. The company has been based out of Edmonton, Alberta, Canada, since its inception; howev ...
-
3rd Year Apprentice Welder
1 week ago
Johnson Controls International Nisku, AB, CanadaTitle: · Apprentice Welder 3rd Year · Department: · Welding · Reports To: · Welding Supervisor · Overview · The Apprentice Welder is responsible for the fabrication of custom prototypes from supplied drawings, fabrication of custom jigs and fixtures to produce production p ...
-
Electrical Apprentice 2nd Year
1 week ago
Johnson Controls International Nisku, AB, Canada Full timeOverview · The 2nd and 3rd year Apprentice Electricians are primarily responsible for installing and terminating conduit, cable, equipment, panels, sensors, and various control components and devices for Silent-Aire Limited Partnership. This position constructs and fabricates co ...
-
3rd Year Apprentice Welder
3 days ago
Johnson Controls International Nisku, AB, CanadaApprentice Welder 3rd Year · Department: · Welding · Reports To: · Welding Supervisor · Overview · The Apprentice Welder is responsible for the fabrication of custom prototypes from supplied drawings, fabrication of custom jigs and fixtures to produce production parts that ...
-
1st Year Apprentice Welder
18 hours ago
Johnson Controls Nisku, Canada Full timeTitle: · Apprentice Welder 1st Year · Department: · Welding · Reports To: · Welding Supervisor · Overview · The Apprentice Welder is responsible for the fabrication of custom prototypes from supplied drawings, fabrication of custom jigs and fixtures to produce production part ...
-
3rd Year Apprentice Welder
5 days ago
Johnson Controls Nisku, Canada Full timeApprentice Welder 3rd Year · Department: · Welding · Reports To: · Welding Supervisor · Overview · The Apprentice Welder is responsible for the fabrication of custom prototypes from supplied drawings, fabrication of custom jigs and fixtures to produce production parts that mee ...
Electrical Apprentice 2nd Year - Nisku, Canada - Johnson Controls
Description
Overview
The 2nd and 3rd year Apprentice Electricians are primarily responsible for installing and terminating conduit, cable, equipment, panels, sensors, and various control components and devices for Silent-Aire Limited Partnership. This position constructs and fabricates control panels/systems and installs interlocking wiring and performs wiring check out.
Roles & Responsibilities
Knowledge, Skills, & Abilities
Job Types: Full-time, Permanent
Salary: $23.55-$27.50 per hour (Jman rate $39.25)
Benefits:
Schedule:
