Machine Operator - Mississauga, Canada - AMMEGA

AMMEGA

Verified Company

Mississauga, Canada

2 weeks ago

Posted by:

Sophia Lee

beBee Recruiter

Description

Machine Operator - Coater - PTFE

Duties and Responsibilities:

Responsibilities will include, but may not be limited, to the following duties outlined below: _
Study the Product Run Log Sheet to identify all the production specifications
Safely operate start up & shut down of the machine, visually verify the settings to ensure constant speed and smooth running of the machine
Ensure that the Adhesive Coating machine is cleaned, oiled, lubricated and greased as per schedule
Consult manufacturer's manuals such as internal SOP (product setup forms) and blueprints to manufacture specific product requirements
Measuring and controlling flow, level, pressure, temperature, tension, chemical composition and other variables in manufacturing and processing using tools like temperature controller
Inspect and test operation of instruments and systems to diagnose faults by using micrometers and pressure relief instruments
Using pneumatic, electrical and electronic testing devices like feeler gauges, micrometers and precision measuring instruments to measure and maintain the thickness of material
Repair and adjust system components, such as adjusting break tensions, speed control and remove defective parts daily
Perform scheduled biweekly preventive maintenance of oven, furnace, and complete test and maintenance reports
Consult with and advise process operators such as chemical mixing operators and quality analysis personnel for compliance based on setup parameters
Conduct shear test using shear testers
Troubleshoot any creases, fold over or streak lines on material by correcting defects through adjusting speed and tension
Immediately alert the maintenance team if any defect is observed or any anomaly is noticed on the machine
Use forklift & industrial overhead crane to load the appropriate fabric roll on the machine
Select the appropriate chemicals according to the specification sheet, make sure to collect the proper chemical drums from the designated storage area
Respect the procedure for premixing, safely mix the chemicals in the mixing room with the mixing machine, ensure that adequate quantity of adhesive is mixed and catalyzed prior to production run
Use the manual stacker to load the drums and move them closer to the coating machine
Make sure the liquid adhesive receptacle tray is clean, use specific solvent solution to clean tray
Use the monitoring panel to measure temperatures, speed, air, and tension on the machine
Fill the traceability documents and make sure all production tracking data are logged on the paper sheet
Take the finished roll out of the machine, by using the forklift or the crane
Use the forklift to place the roll in the designated storage racks & label the roll properly
Respect the procedure for quality tests, take samples for testing, cooperate with QA team

Knowledge and Skills Requirements:

Prior mechanical experience (machine operation, assembly, installation, etc.)
Prior manufacturing experience 2+ years optimal
High school Diploma, GED, Technical/Trade School or equivalent experience
Ability to read and comprehend shop orders and working drawings written in English
Must be able to read and interpret measuring devices (tape measures, calipers, scales)
Forklift certification would be an asset
Ability to lift 50 lbs. & ability to stand for long periods of time
Computer Proficiency experience with data entry
Flexible and adaptable to a changing environment
Must be able to work for any employer in Canada

Salary & Conditions:

Job location: Green Belting Industries, 381 Ambassador Drive, Mississauga, ON
Salary: from 20 $ per hour to 21 $ per hour depending on profile and experience
Days of work: Monday to Friday
Permanent Fulltime position, 40 hours per week
Shift Timing: Afternoon shift (2.30 pm 11 pm)

Benefits:

Paid Sick Days
Employer Paid Comprehensive Group Benefit Plan
Life/AD&D/LTD/ Extended Health/Dental/Health Care Spending Account
Group Pension Plan with Employer Match
Employee and Family Assistance Program
This position belongs to IRCC skill level B with NOC 2016 B code 2243 and NOC 2021 code 22312 TEER
The hiring is open to all applicants able to work 40 hours per week.
For the hiring you will need to provide valid photo ID, SIN number, banking details
Company will conduct criminal background check as part of onboarding

ABOUT US:

Green Belting Industries (Member of the Ammega Group) is a leader company in Teflon / PTFE product quality and service excellence for quality tapes and belts.

Our core mission is to fully enable the most dedicated, knowledgeable and creative team in the industry so that we remain the leading innovator in PTFE.

We cultivate passion for R&D, internal talents, tradition of fabrication, and technical expertise to excel in management performance and operational efficiency in order to deliver enduring value to our customers.

Explo